陶瓷加熱器是一種熱分布均勻的加熱器，具有導熱強，受熱均勻，排除設備熱點和冷點、壽命長、保溫性能好、機械性能強、耐腐蝕、抗磁場等長處。  

 一、使用說明：
  1.陶瓷加熱器的工作電壓不應該超過額定值的10%；
  2.陶瓷加熱器接線部分應該在加熱層和保溫層的外面，外殼一定要正確接地。
  二、使用注意事項：
  1.安裝之前需要先檢查安裝位置與陶瓷加熱板的規格是否匹配，使用的電壓是否一致。
  2.陶瓷加熱器非防水性結構，所以，存放及使用安裝的時候一定不要與油、水、塑膠粒接觸，以防止漏電。
  3.在使用之后如果發現表面出現焦黑狀的色澤，這就表明了發熱及受熱體的散熱不平衡，應該及時調整，避免出現燒穿的情況。
  4.安裝的時候必須把陶瓷加熱器與被加熱體緊密貼合，受熱體的表面應該平坦完整，無凹凸不平的現象。
  5.加熱使用高溫陶瓷加熱板的時候，應該避免用力敲擊或與硬物相撞造成瓷磚斷裂，合金電阻絲外露會影響其操作壽命。

Ceramic heater is a kind of heater with uniform heat distribution. It has the advantages of strong heat conduction, uniform heating, elimination of hot and cold spots of equipment, long service life, good thermal insulation, strong mechanical performance, corrosion resistance, magnetic field resistance, etc.  
1、 Instructions:
（1）. The working voltage of ceramic heater shall not exceed 10% of the rated value;
（2）. The wiring part of ceramic heater should be outside the heating layer and insulation layer, and the shell must be properly grounded.
2、 Precautions:
（1）. Before installation, check whether the installation position matches the specification of the ceramic heating plate and whether the applied voltage is consistent.
（2）. The ceramic heater is not waterproof, so it must not contact with oil, water and plastic particles during storage, use and installation to prevent electric leakage.
（3）. If a burnt black color is found on the surface after use, it indicates that the heating and heat dissipation of the heat receiver are unbalanced, which should be adjusted in time to avoid burning through.
（4）. During installation, the ceramic heater must be closely fitted with the heated body, and the surface of the heated body should be flat and complete without unevenness.
（5）. When high-temperature ceramic heating plate is used for heating, it should be avoided to knock hard or collide with hard objects to cause ceramic tile fracture, and the exposed alloy resistance wire will affect its operating life.